Labels printing blank fields through ZP450 [Solution]

Modified on Tue, 22 Oct, 2019 at 4:05 PM

When printing labels through a Zebra ZP450 printer, you might face the scenario of the printer leaving blank fields in the labels.


This issue might relate to two usual scenarios:


Scenario #1 - The firmware and/or drivers of the printer are outdated and must be updated

Scenario #2 - You are trying to print labels which are not UPS labels with the Zebra ZP450 


The ZP450 is a UPS-only thermal printer: https://www.zebra.com/us/en/support-downloads/knowledge-articles/ups-lp2844-and-ups-zp450-printer-setup-and-troubleshooting.html



None of these are techShip issues, nevertheless, here are our recommendations for each case.


Scenario #1 - Update the firmware and/or drivers yourself, or having a software/hardware technician do it

Scenario #2 - Either use a different printer which supports printing the Carrier labels you are intending to do so, or update the drivers to ones provided in several internet sources to improve compatibility 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article